Rod Pin Crusher of Insoluble Sulfur

With the continuous advancement of pulverizer technology, Rod Pin Crusher of Insoluble Sulfur has been familiar with people. Now the most popular crushing equipment is Rod Pin Crusher of Insoluble Sulfur. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.

Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, the side can turn on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.

When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.

ALPA carbonate Rod Pin Crusher of INSOLUBLE SULFUR Case Sharing: This customer is a company producing, selling lithium carbonate, lithium hydroxide, potassium sulfate, and salt, etc., in the process of selling carbonate, It is found that the current customer needs to be superficite of lithium carbonate, so it is upgraded to the production line of lithium carbonate, purchasing our Alpa's multiple ROD PIN CRUSHER OF INSOLUBLE SULFUR.

finished particle size: D50: 5-8μm
Production capacity: 450kg

Rod Pin Crusher's daily maintenance
1, during production It is necessary to check the temperature rise of the bearing frequently, when the temperature rise exceeds 50 ° C, should be closed, and the reason is to rule out the fault.

3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the grading flow bearing are grease lubrication, using 2 special grease, degree 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwiseThe bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.


To learn more about Rod Pin Crusher's knowledge, please pay attention to the Shan dong alPA website, the company is popular in the development and production of crusher and other products, quality, and consumers welcome,trustworthy.