Turbo Grinder of Metformin Hydrochloride

With the development of society, the application of Turbo Grinder of Metformin Hydrochloride has become more large.

Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The graded point can be continuously adjusted, the performance of Turbo Grinder of Metformin Hydrochloride can be adjusted steplessly, the granular weight of the grading weight is D97 ≤ 3≤150 microns, suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.


ALPA Solid mannitol Turbo Grinder of metformin Hydrochloride case share: a food company requires large production of solid mannitol ultrafine powder. Many of the domestic powder companies have not found a crusher of the compound GMP standard food grade production. The general compound GMP standard pulverizer does not meet the large capacity required for the company. With our help, the company purchased 1 Turbo Grinder of Metformin Hydrochloride of our company. The demand for the large production of solid mannitol is met, which is satisfied with the GMP standard.
Technical parameters:
finished particle size: mannitol: greater than 710 um 7.34%

Let me introduce Turbo Grinder of metformin Hydrochloride Operation method.
1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.
2. The main axis direction must be consistent with the direction of the arrow on the shroud, otherwise it mayWill damage the machine and cause personal injury.

4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing.Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping.If you do not continue, remove the residers from the machine.
8. Regular inspection tools and screens are damaged.If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage.Be sure to tighten the cover to connect the handle to avoid accidents.

ALPA production Turbo Grinder of metformin hydrochloride is equipped with high quality equipment, supports according to demand, the equipment model is complete, high efficiency, simple operation, 24 hours can consult!