Pin Crusher for Sodium Gluconate

Pin Crusher For Sodium Gluconate is one of the important basic technologies in modern industries. In modern industries, it is required to have a small and uniform particle size and higher purity, and ultrafine raw materials. Its nature changes, which makes ordinary materials have a broader application range,

PIN CRUSHER For Sodium Gluconate works mainly after the material accelerates into supersonic flow through the nozzle, compressed air enters the flow of the crushing area. And the material is fluidized, each particle has the same motion state. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.

AlPa Phosphate PIN CRUSHER For Sodium Gluconate case share: The customer's main business is the production and sales of special powder for rust-proof pigments and diamond tool industries. The raw material production and processing, new products are developed in one, with a production and sales enterprise of phosphate, such as mining, smelting, powder, and new materials.
The customer needs to perform airflow grading to the iron phosphate ultrafine powder, eventually experimenting with our company's grading function to meet the customer needs.
Product particle size: 80kg / h

1, overhaul assembly Neutral mounting error. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.

AThe technology of Pin Crusher for Sodium Gluconate produced by LPA makes the structure easier to make the classifier wear resistance.Friends needed to come to us!