Vibration Mill for Fish Bone

There are many people who know the airflow pulverizer, and the Vibration Mill for Fish Bone technology is in a leading position in the same industry.

Crushing product except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape regular, high purity, high activity, good dispersibility. Since the Vibration Mill for Fish Bone generates the Juromon cooling effect during the pulverization process, it is also suitable for ultrafine pulverization of low melting point and thermal material. The gas ratio in the Vibration Mill for Fish Bone pulverization is an important technical parameter and important indicator.
If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated.

When the particle size of the feed is smashed, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.

Technical parameters:
finished particle size: 1250 mesh
Production capacity: 1.2-1.5T

1. If a lubricating oil is added to the rotating section, if the bearing and the shaft are relieved, the bearing will be adjusted; if the bearing wear is impeded, the bearing will be replaced.
2. There is also noise during the pulverization. The cooling sleeve can be used to reduce the temperature, which can allocate water in the crushing chamber.
3. Install a muffler on the fireplace of the crushing room.
4. Resistance equipment, such as using damping boards.

Shandong AlPa is a source manufacturer specializing in Vibration Mill For Fish Bone, all the year round to provide equipment for domestic and foreign customers, welcome to inquire! [1twenty three]