FL/ITC Single Classify Wheel Classifier with Pine granule

There are many people who know FL / ITC Single Classify Wheel Classifier with Pine Granule, and crusher technology is in a leading position in the same industry.

FL / ITC SINGLE CLASSIFY WHEEL CLASSIFIER WITH GRANULE Working Principle: The power of the machine uses purification and dry compressed air. The compressed air is sprayed to the crushing chamber at high speed over a special supersonic nozzle. The airflow has a high speed movement of the material, causing strong collision, friction and shear between materials and materials, thereby achieving breaking. Outlet, enter the collection system. The pulverized material rises into the classification chamber to meet the particle size required by the particle size, and the particles do not reach the particle size required to continue pulverization. The entire production process is fully closed, continuous operation, no dust pollution, purified by dust removal, filtration.

Let's take a look at the maintenance secrets of the eddy current pulverizer transmission chain! Crusher Transmission Chain Protective Hoods should be intact, preventing personal injury accidents in the work in the work. Motor base fastening bolts To regularly check, the foundation must have sufficient steel, preventing the chain from joking or falling down due to the basis, causing drive failure. Check, repair, and maintenance of the machine, the power supply must be cut off and the sign is cut. It is strictly forbidden to extend the hand or other tools into the machine during the machine operation. Only after the machine is completely stopped, it can clean and check the machine. The cable in the pulverizer should have a protective casing. During operationAt least one compressed air line is leaking, and the oil water separation is discharged once. Check if the unloading door is leaking weekly, whether the sealing strip is damaged, whether the unloading link mechanism is in a dead position. Clean the residual material attached to the inner wall of the bucket once a week. Wash the chain, sprocket, and refresh the chain sprocket with diesel brushing each month. Clean the injector of the inner wall of the mixer and the residual attachment material on the inner wall of the mixer and the cover. Monthly measurement of the variation coefficient of the exit and the finished package port of the finished mixer, the determination of the variation coefficient should select the shortest mixed product. In addition, users also need to check whether the wire connection in the motor junction box is loose. Clean the residual materials attached to the inner wall of the mixer and buffer. Clean up the oil and water separation of three linkages to ensure smooth air paths.