FL/ITC Single Classify Wheel Classifier with EPVC

Publish: 2021-09-13 08:13:15

Views:

Airflow pulverized product except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape regular, high purity, high activity, good activity, and good activity. Since Fl / ITC Single Classify Wheel Classifier With EPVC generates a Juromon cooling effect during the crushing process, it is also suitable for low melting point and ultrafine pulverization of thermal materials. The gas-solid ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only the amount of energy is wasteful, but even the dispersion of certain particles will also becomerated. When the feed is grained, when the hard material is pulverized, the particle size of the feed is more stringent. In the case of titanium powder, when the calcined material is pulverized, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70, and cannot exceed 2-5 mesh.

How to continuity FL / ITC Single Classify Wheel Classifier with EPVC life? Here are the following aspects: 1. In the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault. 2. When the new machine is running, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt. 3. Regularly check the lifting parts, promptly guarantee the quality of production and production. 4, blade and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick. 5, the host and gradient flow bearing oil grease lubrication, the use of special grease, and the degree of 265-295.6, and the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high. 7, the spiral feeder is 4,000 hours, plus ordinary calcium based grease.

Shandong AlPa Powder Technology Co., Ltd. specializes in the production and development and service of FL / ITC Single Classify Wheel Classifier with EPVC product technology, welcome to comeconsult. With a perfect quality, excellent service, the most affordable price, the company provides the best crusher products and services for customers.

Previous: FL/ITC Single Classify Wheel Classifier with Modified starch

Next: FL/ITC Single Classify Wheel Classifier with Pine granule