Publish: 2021-09-06 08:20:24
Views:
In the rapidly developing areas, many people have a certain understanding of FL / ITC Vertical Air Classifier of Psticides, and crusher technology is in an absolute leading position in the industry.
Fl / ITC Vertical Air Classifier of Pesticides has several types: airflow mill, fluidized bed foil mill, circulating tube gas flow mill, jet gas flow grinding and target gas flow grinding. The main performance characteristics of the pulverizer: 1, the airflow pulverizer includes a vertical classification device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. It can be used in series with multi-stage classifiers and produces a product having multiple particle sizes. 2, the airflow pulverizer is easy to disassemble, the inner wall is smooth, no dead angle. The whole system is sealed, less dust, low noise, and production process clean and environmentally friendly. 3. The airflow pulverizer control system uses program control and easy to operate.
Do you know how to use FL / ITC Vertical Air Classifier Of Pesticides correctly?
I hope the content below can help you.
1. Preparation before the comminution is started to check whether the host, joint, pipeline, and the valve are normal, working properly.
2, open the pulverizer
(1) Open the compressor power supply, dustpress pressure valve and the main valve, open the power switch of the pulverizer, turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown is: inverter - feeder - main valve compressor - compressive type impeller motor - cyclone material, dust removal switch - fan - universal power supply air compressor.
4, eddy current pulverizer maintenance
(1) Regularly lubricate eddy current crushing machine, but the lubricant should not be too large to prevent the bearing temperature too high.
(2) Check the wear of the impeller, screw conveyor and the crushing nozzle.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After a filter bag, the vortex pulverizer is filtered, and it should be cleaned or replaced.
5, eddy current pulverizerPrecautions
(1) When the discharge equipment is running, the unloading port cannot be reached to avoid accidents.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
Shandong ALPA powder produced various types of crusher, can be a variety of materials such as medicinal materials, ingredients, chemicals, etc., with a maximum effect. Our products are non-standardized products, which will customize their products based on your needs, and make a reasonable offer according to the product.
E-mail: marketing@alpapowder.com
Add.: No.168, Wenhua Road, Advanced Manufacturing Industrial Park, Anqiu, Weifang City, Shandong Province, China.
Copyright © 2000-2019 | Shandong Alpa Powder Technology Co., Ltd. All rights reserved | Sitemap
