With the continuous development of pulverizer technology, FL / ITC Vertical Air Classifier of DiClofenac has gradually penetrated into daily life.
FL / ITC
Vertical Air Classifier Of DiClofenac is a high-speed airflow to form a high-speed airflow with multiple relative-arranged nozzles to achieve ultrafine pulverization.
The crushed material enters the grading chamber with the rising airflow. Since the grading rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the hierarchical rotor, and the center of heart is generated by the viscous effect of the airflow. When the centrifugal force of the particles is greater than the heart force, that is, the fractional particle diameter The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air.
Low temperature without medium smashing, ensuring high purity and physical properties of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet is more than 30% of the conventional gas flow milling machine, and the grading accuracy is higher.
ALPA equipment is small, and the structure of the pulverizer can be highly machined ultrafine powder, avoiding the wear of the horizontal grading machine grading part, and the service life of the equipment and easy-to-load load under the same material is multiple products. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74um.
Fl / ITC Vertical Air Classifier Of DICLOFENAC works airflow pulverizer and cyclone separator, dust collectors and air machines into a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed sluice nozzle. At the intersection of multiple high pressure airflow, the material repeatedly collides, friction, shear and crushing. Under strength, the thickness, fine product is separated, and the fine particles that meet the particle size requirements are collected by the cyclone and the dust collector by the grading wheel, and the crude particles reduce the crushing area to continue to break.
How to continuity FL / ITC Vertical Air Classifier of DICLOFENAC life? Here are the following aspects:
1. In the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault.
2. When the new machine is running, the transmission belt is easily stretched.The tightness of the belt should be adjusted to ensure the life of the belt.
3. Regularly check the lifting parts, promptly guarantee the quality of production and production.
4, blade and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, the host and gradient flow bearing oil grease lubrication, the use of special grease, and the degree of 265-295.
6, and the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high.
7, the spiral feeder is 4,000 hours, plus ordinary calcium based grease.
To learn more about FL / ITC Vertical Air Classifier Of DICLOFENAC, please pay attention to Shandong ALPA Powder Technology Co., Ltd., the company is in research and development and production of crusher and other products, quality, and is deeply consumed. Welcome, trustworthy.
