Horizontal Single Classifying Wheel Air Classifier with talc

Now let's talk about Horizontal Single Classifying Wheel Air Classifier With Talc common faults. Horizontal Single Classifying Wheel Air Classifier With Talc Troubleshooting: Feedback: Improper Treas, Pipelines, Screen Clips, Dust Pocket Body Dialect or Severe Wear, Hammer Wear, etc., can cause feedback . When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathable, or replace the hammer head. 2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and the spindle, the balance the rotor and the adjustment belt are elastic, the bearing can return to normal state. 3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step. 4, there is a sound inside the crusher: the components of the crusher are damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should immediately stop the damaged parts or remove the hard object. 5, low production efficiency: insufficient electric power, misconduct of pulley, slippery slip, hammer wear, and high raw material uneven or high water content is the main reason for the low production efficiency. We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.