Horizontal Single Classifying Wheel Air Classifiersalt

Horizontal Single Classify Wheel Air Classifiersalt Working Principle: The power of the machine uses purified dry compressed air. The compressed air is sprayed to the crushing chamber at high speed over a special supersonic nozzle. The airflow has a high speed movement of the material, causing strong collision, friction and shear between materials and materials, thereby achieving breaking. Outlet, enter the collection system. The pulverized material rises into the classification chamber to meet the particle size required by the particle size, and the particles do not reach the particle size required to continue pulverization. The entire production process is fully closed, continuous operation, no dust pollution, purified by dust removal, filtration.

Now let's talk about the troubleshooting of Horizontal Single Classify Wheel Air Classifiersalt. Horizontal Single Classify Wheel Air Classifiersalt Troubleshooting: 1, feed back: Improper tunnel adjustment, pipeline clogging, screen jam, dust bag gas permeability or severe wear, hammer wear is severe, etc. will cause feedback. When this happens, you should find out the reason, then take elimination measures, orClear the valve, replace the powder bag, improve gas permeability, or replace the hammer. 2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and the spindle, the balance the rotor and the adjustment belt are elastic, the bearing can return to normal state. 3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step. 4, there is a sound inside the crusher: the components of the crusher are damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should immediately stop the damaged parts or remove the hard object. 5, low production efficiency: insufficient electric power, misconduct of pulley, slippery slip, hammer wear, and high raw material uneven or high water content is the main reason for the low production efficiency. We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.