Turbo Mill of White carbon black

With the rapid growth of China's economy, high-energy mining machinery industry, especially Turbo Mill of White Carbon Black, there will be a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development, green, environmentally friendly, healthy bed jet rubbing equipment and products more extensive in the entire mineral powder industry. When applied to people's lives, it is necessary to optimize the use of equipment technology.

Turbo Mill of White Carbon Black works in work, and when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

Technical parameters:
finished particle size: D90: 500 mesh
Production capacity: 2T