Hammer Mill for Graphene

With the continuous development of pulverizer technology, Hammer Mill for Graphene has gradually penetrated into the daily life of people.

Many manufacturers who want a crushing process will choose to purchase a Hammer Mill for Graphene, but not all crushers can apply to production and processing, and the wrong processing method will make the pulverizing velocity speed. The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large.

The device operates for a long time in a higher pulverized pressure, which requires uniformity of cyclical replacement loss.

The products after the crushing are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.

Alpa Aluminum Silicate Hammer Mill for Graphene Experiment: A environmental protection technology company needs to grade aluminum superficition of aluminum silicate due to production demand, because uncertain demand can not be achieved, so the experiment is carried out. Experiment We AlPA air grade machine equipment can be classified for the aluminum silicate ultrafine powder provided by the company. Finally, the product particle size obtained by the experiment: D90: 18.3μm, yield: 460kg / h 加 加 加..
Welcome all major Powder grading needs manufacturers, to the factory, incoming experiments.