Turbo Mill of Lithium carbonate

Turbo Mill of Lithium Carbonate is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Turbo Mill of Lithium Carbonate is different from Other crushers, which are pulverized by the impact of the particles, the impact of the material on the impact of the material, the impact of the shear, the high-speed airflow, the material of the material, friction and shear and other components. It has the following main features:

1. The grinding temperature is low, which can be pulverized, low melting material. According to the high-speed jet Joule effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, short production cycle, high release rate. Due to high-speed collisions and closed crushing, the probability of collision between materials is very large, and dust does not leak.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented, and drying operations can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a raised role in the pharmaceutical industry.
ALPA Pigment Turbo Mill of Lithium Carbonate Case Sharing: The customer needs to use the pigment ultrafine pulverized equipment during its production. Through the ultrafine pulverization of the pigment, the quality of the product is to improve the product, after more than the same type of equipment, finally chose our AlPa's Turbo Mill of Lithium Carbonate. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there is no too much particle size range.
Technical parameters:
finished particle size: D90: 13μm;
Production capacity: 130kg / h

Users who want to view crusher related information can also log in to our website directly. !