cell mill of stem

Most of the product production and processing of products in the current stage use Cell Mill of Stem for the use of Cell Mill of STEMs to be a very common way of processing, accompanied by the continuous improvement of scientific productivity, and the technology of grading equipment is replaced. It is also imminent. The performance and internal configuration of the grading equipment of the airflow must also keep the trend of the era to continue the upgrade of the product.

The temperature in Cell Mill of STEM increases. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
ALPA Pigments Cell Mill of Stem Case Sharing: This customer needs to use the pigment ultrafine pulverized equipment during its production. Through the ultrafine pulverization of the pigment, the quality of the product is to improve the quality of the product. After more than the same type of equipment, we finally selected our AlPA Cell Mill of Stem. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there is no too much particle size range.

Finished granularity: D90: 13μm;
Production capacity: 130kg / h


Different series models have different performance characteristics, different granularity, production Different efficiency, different production and production environment, the price of processing equipment is also different, customers can consult the ALPA engineers to purchase appropriate models and specifications according to their own situation, welcome to inquire.