Turbo Mill of cellulose

We all know that Turbo Mill of Cellulose is a very strong airflow, a lot of stubborn and hard materials that encounter a crusher will be cut into a uniform block of blocks,

Turbo Mill of Cellulose is a high-speed airflow to form a high-speed airflow using multiple relative-arranged nozzles to achieve ultrafine pulverization. The crushed material enters the pulverizer with the rising airflow. Since the pulverized rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the pulverized rotor, and the center of heart is generated by the viscous action of the air flow. When the centrifugal force of the particles is greater than the heart force, that is, the pulverized particle size The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air.
Low temperature without medium smashing, ensuring high purity and physical characteristics of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet is more than 30% of the pulverization efficiency than the conventional gas flow mill, and the pulverization accuracy is higher.

ALPA equipment is small, the structure of the pulverizer can be highly machined ultrafine powder, avoiding the wear of the horizontal pulverizer pulverized part, and the service life of the equipment under the same material is the international similar product. Multiplier. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74um.

Technical parameters:
Finished granularity: D90: 400 mesh
Production capacity: 400kg / h