Ring Roller Mill of silicon carbide

With the continuous development of pulverizer technology, Ring Roller Mill of Silicon Carbide has gradually penetrated into daily life.

Ring Roller Mill of Silicon Carbide will rise during work, and when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
ALPA lysis Carbon Black Ring Roller Mill of Silicon Carbide case Share: The company is a renewable energy application company in Inner Mongolia, and the company needs to use ultrafine pulverized equipment when the company recovers after recovery of waste tires. Cracking carbon black performs ultrafine pulverization. After many incidents, our AlPa Ring Roller Mill of Silicon Carbide was selected.

finished particle size: D90: 500 mesh
Production capacity: 2T


Shandong Alpa Powder Technology Co., Ltd. is committed to Ring Roller Mill of Silicon Carbide, owns Mature process flow, strong technical strength, specializing in Ring Roller Mill of Silicon Carbide, survive by quality, welcome everyone to come to consult.