pin mill of insoluble sulfur

In the classification operation of the industrial production in this stage, the use of pin mill of Insoluble Sulfur is mainly targeted for the effective crushing of solid particles, and is a commonly used comminution equipment in the ultrafine pulverization process.

pin mill OF INSOLUBLE SULFUR Work will rise, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

Welcome major composite powder manufacturers to visit, incompetent experiments.
ALPA is a research and development of research and sales of ultra-fine classifiers, precision grading machines, laboratory grades, and is committed to classifying machines. Welcome friends in need to come to cooperate.