Hammer Mill of Chemical pigment

With the rapid growth of China's economy, high-energy mining machinery industry, especially Hammer Mill of Chemical Pigment will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development, green, environmentally friendly, healthy bed jet rubbing equipment and products more extensive in the entire mineral powder industry. When applied to people's lives, it is necessary to optimize the use of equipment technology.

The principle of pulverization is substantially the same as the hydraulic level, and the above settlement theory can also be used for airflow classification. However, in the airflow classification, since the density and viscosity of the air are much smaller than the density and viscosity of water, the same particles are more settled in the air than in the water. Moreover, the density and viscosity of the air vary with temperature and pressure.

In order to cause air flow, wind pulverization equipment typically requires an appropriate fan (exhaust or blast).

When the airflow is classified, the fine product is usually taken away by the airflow. In some cases, the raw material is sent to a pulverized device from the airflow.

As is well known, the load of solid particles in the air under normal pressure does not exceed 500 g / m3 air. When it reaches 1 kg / m3, the particles fall from the airflow. The load is related to the density and particle size of the particles. When the fine particle material is treated, the load generally does not exceed 200 to 300 g / 3 air. According to this calculation, the volume concentration in the gas stream is much smaller than 0.03. Therefore, when the airflow is classified, in most cases, it belongs to the free settlement.

The speed required to move the particulate material in the horizontal and vertical direction is relatively large, and the speed required in the horizontal direction is relatively large, and as the particle density increases, for example, for the density 1.5 of the pulverized coal and Western / cubic centimeter. The minimum wind speed is 2 m / sec; a powder material having a density of 2.5 g / cm, the speed is not less than 3.5 m / sec; a powder having a density of 4 g / cm 3, a minimum speed of 4 meters per second. Due to the complexity of the situation, the appropriate airflow rate in each particular situation should be determined by experiments.

In the booster flow, the airflow speed required to suspend the particles having a certain density and particle size is greater than the calculated value of free settling, which is due to the uneven distribution of the airflow along the pulverizing chamber portion.

The Hammer Mill of Chemical Pigment has a wide comminuted range, high pulverization efficiency, high pulverization accuracy, accurate cutting particle size, and good stability.
ALPA Carbon Hammer Mill of Chemical Pigment Case Sharing: The company produces superfine and super fine pulveruts in the production of static pressure graphite. After multi-party examinations and experiments, finally selected our AlPA as a cooperative customer, and we provide the Hammer Mill of Chemical Pigment provided to its carbon pulverized particle size, particle size range, yield and other needs.
Technical parameters:

Production capacity: 800-1000kg


Hammer Mill of Chemical Pigment produced by our company can not only range from ordinary powder 20-2 μm in detail, and can be used directly with the mechanical pulverization equipment, forming a closed circuit, improving the pulverization efficiency, and avoiding the production of high temperatures in the cavity to cause adhesion, glue, causing the operation, while The grading machine has also received a well-praised by the majority of users, and friends who need it are in touch with us!