Hammer Mill for Granulated sugar

With the continuous increase in social needs, Hammer Mill for granulated sugar continues to improve in the use of performance, finished product quality, service life, etc., very well, the raw materials are processed into microtes and even nanoscale fine powder, and they have also been chemical. Many of the fields of food, pesticides, cosmetics, dyes, coatings, and electrons have been widely used.

Hammer Mill for Granulate Sugar temperature increases, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

Technical parameters:
finished particle size: 10-200 mesh
Production capacity: 10T