Turbo Mill of Calcium fluoride

It is well known that Turbo Mill of Calcium Fluoride This product technology has received extensive attention from the industry.

Turbo Mill of Calcium Fluoride temperature increases, and when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

Shandong Alpa Powder Technology Co., Ltd. is committed to Turbo Mill of Calcium Fluoride, has a mature process process, the company has strong technical strength, specializing in Turbo Mill of Calcium Fluoride, survive in quality, welcome everyone to come consult.