Rotor Mills of Ferrosilicon

The airflow pulverizer plays a vital role in the current industrial production. In various major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With the continuous development of airflow crushers, the various major industries are particularly medical, and the food industry puts forward new requirements in the pulverization process. It is desirable that the powder can be kept clean. In the manufacture of traditional airflow pulverizer, carbon steel, stainless steel is generally used as the lining material of the airflow pulverizer.

For the longer life of Rotor Mills of Ferrosilicon, it has always been kept in mind, and it is necessary to keep in mind usage.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Rotor Mills Of Ferrosilicon is cleaned in time. Keep Rotor Mills of Ferrosilicon's internal cleaning to avoid oxidation of the material and the inner contact.



ALPA Sodium Sodor Mills of Ferrosilicon Case Sharing: This customer is mainly engaged in high energy chemistry, hydrogen production and hydrogen energy development, special gases, fine chemicals, environmental engineering, etc. Research design. The research institute requires a device that can be superfined with sodium chlorate. Find a domestic powder equipment enterprise. Finally, I bought a Rotor Mills of Ferrosilicon in our AlPa.
Technical parameters:

Production capacity: 500kg


Any mechanical equipment, there is a certain precaution before use, must Check the precautions to operate, reduce the damage rate to the lowest, so Rotor Mills of Ferrosilicon takes what preventive measures before use?
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.

3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss. 6. If damage should be replaced immediately,Check certain components.
For more details, please pay attention to Shan Dong Alpa.