Impact Grinder of Blast Furnace Slag

It is well known that the product technology of Impact Grinder of Blast Furnace Slag has been widely valued by the industry.

Impact Grinder of Blast Furnace Slag is very wide in today's industrial production. It is often used to smash the added value of larger materials. After ultrafine crushing, it is generally widely used in materials. Higher, being loved by the industry.

A new material company is a national high-tech enterprise integrating R&D, production, sales and technical services. The company focuses on the pressure and challenges of our customers, excavation of the potential of inorganic non-metallic materials, integrates all kinds of organic materials, providing excellent functions and low-cost split solutions, vigorously expands in new energy, Application of New Materials, Environmental Saving and Energy Saving and Other Fields.
The company and the domestic inorganic non-metallic materials, cooperation, benefiting the ecological chain platform, serving the ecological chain platform, serving major multinational companies, listed companies and excellent domestic small and medium-sized enterprises, and continuously introducing cost-effective products, Create customer value and achieve capital appreciation.
Case parameters:
Product particle size: D100: 14μm
Hour Yield: 600kg

1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
2, open the pulverizer

(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance

(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions

(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
Shandong AlPa is a 20-year experience manufacturing company with Impact Grinder of Blast Furnace Slag equipment, with a number of patents, welcome to inquire!