Rotor Grinder of metformin hydrochloride

Rotor grinder of metformin Hydrochloride can be used in the current industrial production process, and ALPA has been committed to the development and application of equipment such as grading machines for many years. The classification machine has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs to our customers in a large range.

A Rotor Grinder of metformin Hydrochloride costs, if you want to use Rotor Grinder of Metformin Hydrochlor for a long time, please pay attention to the following:

In the production process, Temperature rises in the bearing frequently, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5.Rotor Grinder of metformin Hydrochloride host and level score bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a seventeen introduction to the daily maintenance of Rotor Grinder of Metformin Hydrochloride.


ALPA Quartz Sand Rotor Grinder of Metformin Hydrochloride case Share: This customer needs to grades quartz sand, compared to a number of powder equipment manufacturers, and finally pass the experiment, finally selected Our AlPA classifier equipment. Product particle size: D95: 45μm hour Yield: 8-12T Welcomes major quartz sand manufacturers to visit, incompetent experiments.

Here everyoneJust learn together with Xiaobian to learn the Rotor Grinder Of Metformin Hydrochloride inspection steps.
Rotor Grinder of metformin HydrochlorIDE is a device for ultrafine pulverized dry materials using air separation, heavy polishing, shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber through the feed port, and is crushed along the grinding rail, and the crush is achieved. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.

A disc airflow pulverizer first carefully checks whether there is damage in the transportation in the transportation, then put the high machine and the auxiliary electrical control unit in place, and then turn on the pipeline of the main aircraft, each When equipped with a tube, the \"iron anchor 609\" is used to protect the \"iron anchor 609\" to ensure the sealing of the pipe, and each single machine and pipe are connected to the ground wire and grounded to avoid dust explosion caused by electrostatic sparks. Before each stand-alone trial operation, check whether there is a metal item in the machine, if there is an exclusion. Whether the bolt is firm and the tightness of the belt, the reliability of the shield, and the like. After five minutes of empty bus, the operator should carefully observe the various instruments on the control cabinet, and they can be pushed. After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subtracted to ensure that the normal operation of the discharge is fixed. The stepless shift handle of the classifier can change the speed of the hierarchy, and achieve the excellent adjustment of the product. If the product particle size is required, the speed can be improved, and the rotational speed is reduced, and large particle size particles can be reduced.

The above is that the user receives the normal acceptance operation process after the Rotor Grinder of Metformin Hydrochlorie product, you can try to identify the use

The company can provide free experiments and testing, and provide 24 hours. Consult service, welcome.