Rotor Mills for Cedar Skin

Publish: 2021-11-17 09:51:29

Views:

Rotor Mills for Cedar Skin is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Rotor Mills for Cedar Skin is one A comminuted equipment that is widely used in the current stage, which has a very good fineness produced in production, which can stringed silicon carbide, metal, ore and other substances, and can also perform purity requirements Production of ceramics, medicine, biochemical products.

ALPA Crystalline Sulfur Rotor Mills for Cedar Skin Case Sharing: Shenyang needs an apparatus capable of ultrafine pulverization of crystalline sulfur. Crystalline sulfur is a flammable and explosive raw material, so there is a very high demand of the explosion-proof system of the pulverized apparatus. After many examinations, our company's nitrogen protection Rotor Mills for Cedar Skin met the production needs of the company. Rotor Mills for Cedar Skin has an advantage in security, production capacity, energy consumption.

Technical parameters:
Finished particle size: 200-300 mesh
Production capacity: 1.5T

During the production process, we should pay attention to maintenance and maintenance of Rotor Mills for Cedar Skin. .

1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find the cause and troubleshoot.

2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, which should be regularly inspected, replace it in time to ensure quality and production.
4, the wear of the blade and lining should be checked regularly. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.

6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower test) The temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.

11. After 3,000 hours, the new oil should be replaced, and then used after 500 hours of oil, then use it after 1000 hours.

There are still a lot of use of Rotor Mills for Cedar Skin. I want to know more about the ultra-fine glow grace machine, welcome to consult with us!

Previous: Rotor Crusher of Sendust

Next: Rod Pin Mill of Rare Earth Alloy