Horizontal Air Classifier with carbon black

The working principle of Horizontal Air Classifier With Carbon Black is to use high-speed rotating hammers to hit materials, crush the decision surface, the obedient surface and the natural gap. The material sent to the crusher is affected by the rotor, and the rotor rotates around the central axis at a speed of 25 to 40 m / s, and breaks the first time. The material then obtains the energy disc from the rotor, flying on the hard wall at high speed, and performs secondary comminution.

Let's learn about the knowledge of Horizontal Air Classifier With Carbon Black Lubricants. Select the Horizontal Air Classifier With Carbon Black Lubricant product to select the type and label of the lubricant according to the instructions on the device manual. General Horizontal Air Classifier With Carbon Black equipment manufacturer's production and use of lubricants is very clear. This requires we choose in actual work. Select according to the working conditions of the equipment. For machines with higher temperatures, high viscosity oils, ensure the thickness of grease under normal operating conditions, and ensure smooth flow of lubricants in low temperature environment; when the mechanical operating speed is high, the viscosity is selected. Smaller oil ensures good permeability and fluidity. If the grease is too thick at this time, it will increase the operational resistance. When the load is relatively large, the oil with a slightly high viscosity should be used to ensure the thickness of the grease. Buy HorizontalWhen Air Classifier With Carbon Black Lubricants, the physical properties and chemical properties, such as viscosity, flash point, corrosion resistance, etc., but also combined with the manufacturer's instructions, under the premise of considering comprehensive benefits and management benefits, as much as possible Reduce the type and quantity of oil to reduce financial costs. The storage of lubricants and storage of oil plays an important role in the performance of oil. When the lubricant is in contact with the non-ferrous metal, it will oxidize its performance, and the corrosion will damage the machine during use. Therefore, in the storage process, it should be avoided in contact with copper. The barrel oil should be kept cleaned and ventilated, protected from light. The storage time of lubricating oil should not be too long to avoid deterioration. The above is the Knowledge of the Horizontal Air Classifier With Carbon Black manufacturer to buy a pulverizer lubricant

As a 20-year powder engineering equipment manufacturer, Shandong Alpa has more than 3,000 customers at home and abroad. The rich research and development experience has always led the front end of the industry, so before consulting, you need to provide the characteristics of the crushing material, the granular parameters, production production range, purity requirements, specific process requirements (anti-high temperature, explosion-proof, dust pollution Wait), professional engineers provide appropriate equipment models or system solutions according to this information. Welcome to inquire.