Horizontal Air Classifier with slag

With the rapid growth of China's economy, high-energy mining machinery industry, especially Horizontal Air Classifier with Slag will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development, green, environmentally friendly, healthy bed jet rubbing equipment and products more extensive in the entire mineral powder industry. When applied to people's lives, it is necessary to optimize the use of equipment technology.

In addition to the particle size, the airflow crushing product has the characteristics of narrow particle size distribution, smooth particle surface, high purity, high activity, good dispersibility. Since Horizontal Air Classifier With SLAG generates a Juromon cooling effect during the pulverization process, it is also suitable for ultrafine pulverization of low melting point and thermal material. The gas-solid ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only the amount of energy is wasteful, but even the dispersion of certain particles will also becomerated. When the feed is grained, when the hard material is pulverized, the particle size of the feed is more stringent. In the case of titanium powder, when the calcined material is pulverized, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70, and cannot exceed 2-5 mesh.

Horizontal Air Classifier With SLAG features: reasonable structure, stable operation, small energy consumption, large crushing capacity, small size, no malfunction, convenient cleaning and maintenance. 2, the outer casing uses water cooling and the air volume generated by the air to transport the crushing material, and the temperature is increased, and the thermal material is pulverized. 3, the wear of the blade is generated by a large number of ultrasonic eddy currents produced on the back of the blade and the vibration of the high frequency pressure. 4, the structure is compact, there is no dust overflow problem.

Let me introduce you to the HORZONTAL Air Classifier With SLAG. 1. Before using a pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened. 2. The spindle direction must be consistent with the direction of the arrow on the shroud, otherwise it may damage the machine and cause personal injury. 3. Check if the crusher is complete. 4. CheckCheck if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine. 5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion. 6. The oil cup on the machine should always note full lubricant to ensure that the machine is operating normally. 7. The feeding should be stopped before stopping. If you do not continue to use, remove the residers from the machine. 8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately. 9. There is a slight vibration when using the fuselage. Be sure to tighten the cover to connect the handle to avoid accidents.