Multiple Classify Wheel Classifier for Metallic silicon

Multiple Classify Wheel Classifier for Metallic Silicon is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good accuracy.

Using Multiple Classify Wheel Classifier During the fracture production process of For Metallic Silicon, the ultrasonic air flow generated by the equipment can constantly collide between the materials, and this supersonic airflow can also produce a good impact of raw materials, and then material is still It can achieve a good crushing effect with the inner wall of the equipment.

Multiple Classify Wheel Classifier for Metallic Silicon features ultrafine pulverization for dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns. 2. Relative fluidized bed gas flow pulverizer has a good crushing effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized. 3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, break, suitable for low-melting thermal sensitive materials. 4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.

Multiple Classify Wheel Classifier for Metallic Silicon is widely used, do you know how to use it correctly? The following content hopes to help you. 1. Preparation before departure. Check whether the host, joint, pipeline, and the valve are normal, working properly. 2. Turn on the machine (1) Open the compressor power, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch. (2) From zero, gradually adjust to the specified speed. (3) Open the fan, cyclone separator, dust collector, charge motor, turn on the total power box, set the inverter frequency, and then start charging. (4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel. 3, the order of stop is: inverter -Vehicle - Main Air Valve - Compressor - Level Leaf - Motor Cyclone Material, Dust Removal Switch - Fan - Main Power - Air Compressor. 4. Maintenance (1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature too high. (2) Check the wear of the impeller, screw conveyor and the crushing nozzle. (3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect. (4) After the filter bag is a period of time, it should be cleaned or replaced. 5. Precautions (1) When the discharge equipment is running, the unloading port cannot be reached to avoid accidents. (2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged. (3) Regularly check the safety valve to ensure safety.

Shandong AlPa is a well-known particle and powder processing system supplier, which is committed to change in the traditional powder industry. We provide customized and through CE certified products: airflow pulverizer, mechanical pulverizer, airflow classifier, ball milling production line, surface modification production line, etc. In the field of medical, food, chemical, minerals, new materials, solid waste disposal, we have a mature system. We offer more than just machines. We help you design the ideal system to meet your needs. In the past 20 years, "the future of the advanced materials in powder technology" has always been our business mission. We look forward to and desire to embrace the future. To this end, we have made full preparation. We wish to grow with you.