Multiple Classify Wheel Classifier for kaolin

Most of the product production and processing in the current stage uses Multiple Classify Wheel Classifier for Kaolin's smashing is one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading equipment of the airflow must also keep the trend of the era to continue the upgrade of the product.

Multiple Classify Wheel Classifier for Kaolin works airflow pulverizer and cyclone separator, dust collector and air blowing machine form a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed sluice nozzle. At the intersection of multiple high pressure airflow, the material repeatedly collides, friction, shear and crushing. Under strength, the thickness, fine product is separated, and the fine particles that meet the particle size requirements are collected by the cyclone and the dust collector by the grading wheel, and the crude particles reduce the crushing area to continue to break.

Multiple Classify Wheel Classifier for Kaolin is widely used, do you know how to use it correctly? The following content hopes to help you. 1. Preparation before departure. Check whether the host, joint, pipeline, and the valve are normal, working properly. 2. Turn on the machine (1) Open the compressor power, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch. (2) From zero, gradually adjust to the specified speed. (3) Open the fan, cyclone separator, dust collector, charge motor, turn on the total power box, set the inverter frequency, and then start charging. (4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel. 3, stop sequence: inverter - feeder - main air valve - compressor - grade impeller - motor cyclone material, dust removal switch - fan - Main power supply - air compressor. 4. Maintenance (1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature too high. (2) Check the wear of the impeller, screw conveyor and the crushing nozzle. (3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect. (4) After a filter bag, you should clean or replace it.. 5. Precautions (1) When the discharge equipment is running, the unloading port cannot be reached to avoid accidents. (2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged. (3) Regularly check the safety valve to ensure safety.

For more information, please pay attention to Shandong ALPA Powder Technology Co., Ltd., the company mainly airflow pulverizer, airflow mill, pharmaceutical gas flow crusher, disc air pulverizer, eddy current pulverizer.