FL/ITC Multiple Classify Wheel Classifier Silicon nitride

FL / ITC MULTIPLE CLASSIFY WHEEL Classifiersilicon Nitride is wide, and the operation is simple and convenient, but during the pulverization process, the crushing effect is often different. The crushing machine is highly affected by the following factors: the temperature and pressure of the gas ratio, the feed particle size, the work quality, and the pulverization aid. The gas-solid ratio of the pulverizer is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which in turn affects the fineness of the product. However, if the gas is too high, it will not only waste energy, but will even degrade the dispersion performance of certain pigments. When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 ~ 200 mesh when pulverizing calcination; the material after the pulverization surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh. So, should you choose how high pressure when crushing? Those skilled in the art depends primarily on the comminutability and fineness requirements of materials.

The main performance characteristics of the airflow pulverizer: 1, it includes vertical grading equipment, product size D97: 8 150 microns adjustable, good particle shape, narrow particle size distribution. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time. 2, the device is disassemble and cleaning, the inner wall is smooth, no dead angle. The entire system is closed, less dust, low noise, clean and hygienic production process. 3. The control system uses program control and easy to operate.