FL/ITC Multiple Classify Wheel Classifier with Diclofenac

FL / ITC MULTIPLE CLASSIFY WHEEL CLASSIFIER WITH DICLOFENAC is a very practical and convenient industrial crushing equipment, most chemical industry, polymer materials need to be used, AlPa crushers are well crushing, granules delicate, affordable, .

High-speed jet enters the crushing chamber, collides with particles, and many times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, At the power of the rotational speed of the FL / ITC Multiple Classify Wheel Classifier With Diclofenac, the thickness of the material is separated from the separation, the fine particle size of the graded wheel into the cyclone separator and dust removal, continues to be pulverized. The classifier produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the grading requirements of the material. The grading machine has a greater amount of processing, energy saving, simple operation, and low maintenance costs.

FL / ITC MULTIPLE CLASSIFY WHEEL CLASSIFIER WITH DICLOFENAC can be used in series with a multi-stage classifier and produced a product having multiple particle sizes. The device is easy to disassemble, the inner wall is smooth, and there is no dead angle. The whole system is sealed, less dust, low noise, and production process clean and environmentally friendly. The control system uses program control and easy to operate.

Now let's talk about FL / ITC Multiple Classify Wheel Classifier With DICLOFENAC Common faults. FL / ITC MULTIPLE CLASSIFY WHEEL CLASSIFIER WITH DICLOFENAC Troubleshooting: 1 Irrigation. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathable, or replace the hammer head. 2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and the spindle, the balance the rotor and the adjustment belt are elastic, the bearing can return to normal state. 3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step. 4, there is a sound inside the crusher: the components of the crusher are damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should immediately stop the damaged parts or remove the hard object. 5, low production efficiency: insufficient electric power, misconduct of pulley, slippery slip, hammer wear, and high raw material uneven or high water content is the main reason for the low production efficiency. We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.

If you use the needs of the FL / ITC Multiple Classify Wheel Classifier with Diclofenac and questions, please contact us,