Single Classify Wheel Classifier of EPVC

Single Classify Wheel Classifier OF EPVC is different from other crushers, which are collisions between particles, airflow impact and shear, high-speed airflow effects of material impact, friction and shear The components are pulverized. It has the following main features: 1. The grinding temperature is low, can pulverize the thermal, low melting material. According to the high-speed jet Joule effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction. 2, short production cycle, high release rate. Due to high-speed collisions and closed crushing, the probability of collision between materials is very large, and dust does not leak. 3. Products having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained. 4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder. 5. A variety of joint operations can be achieved, and drying operations can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a raised role in the pharmaceutical industry.

Single Classify Wheel Classifier of EPVC works airflow pulverizer and cyclone separator, dust collectors and air machines into a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed sluice nozzle. At the intersection of multiple high pressure airflow, the material repeatedly collides, friction, shear and crushing. Under strength, the thickness, fine product is separated, and the fine particles that meet the particle size requirements are collected by the cyclone and the dust collector by the grading wheel, and the crude particles reduce the crushing area to continue to break.

SINGLE CLASSIFY WHEEL CLASSIFIER OF EPVC is necessary to clean the air pulverizer after long-term use. After cleaning the pulverizer, all machines must be removed. The demolition skill is also very good. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is disassembled, the four screws on the base can be removed, and then remove the hopper. When the screen is removed, the airflow pulverizer door can be opened directly and the screen can be removed at the end. After the mobile gear is removed, the fastening nut is released first, and then the live teeth are separated from the spindle. ThenMove the mobile gear and put it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the gas flow crusher. Do not cause any damage to the components of the machine itself.

Today, I will introduce you to here, I want to know more information, please continue to pay attention to our website.