Single Classify Wheel Classifier of rice

Single Classify Wheel Classifier Of Rice is a very common and commonly used pulverizer. It has a wide range of applications involving many industries.

Single Classify Wheel Classifier Of Rice is widely used, do you know how to use it correctly? The following content hopes to help you. 1. Preparation before departure. Check whether the host, joint, pipeline, and the valve are normal, working properly. 2. Turn on the machine (1) Open the compressor power, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch. (2) From zero, gradually adjust to the specified speed. (3) Open the fan, cyclone separator, dust collector, charge motor, turn on the total power box, set the inverter frequency, and then start charging. (4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel. 3, stop sequence: inverter - feeder - main air valve - compressor - grade impeller - motor cyclone material, dust removal switch - fan - Main power supply - air compressor. 4. Maintenance (1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature too high. (2) Check the wear of the impeller, screw conveyor and the crushing nozzle. (3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect. (4) After the filter bag is a period of time, it should be cleaned or replaced. 5. Precautions (1) When the discharge equipment is running, the unloading port cannot be reached to avoid accidents. (2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged. (3) Regularly check the safety valve to ensure safety.