FL/ITC Single Classify Wheel Classifiermonosodium glutamate

FL / ITC Single Classify Wheel ClassifierMonosodium Glutamate Operation Performance: Auxiliary, the bag type dust collector is auxiliary, the host is set in the centrifugal grading device, which can be fine grinding, There is also a classification function, a wind-cut cut, no screening or mesh, and powder particles can be arbitrarily adjusted, and the crushing material, the negative pressure is delivered to the exhaust valve port, and the product requirements, the superfine classifier is widely used in chemicals, Dyes, coatings, pharmaceuticals, food and other industries.

Let me introduce you to the operation method of FL / ITC Single Classify Glutamate. 1. Before using a pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened. 2. The spindle direction must be consistent with the direction of the arrow on the shroud, otherwise it may damage the machine and cause personal injury. 3. Check if the crusher is complete. 4. Check if the airflow pulverizer has a hard object such as a metal in a crushing room, otherwise it will damage the tool and affect the machine. 5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion. 6. The oil cup on the machine should always note full lubricant to ensure that the machine is operating normally. 7. The feeding should be stopped before stopping. If you do not continue to use, remove the residers from the machine. 8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately. 9. There is a slight vibration when using the fuselage. Be sure to tighten the cover to connect the handle to avoid accidents.