FL/ITC Single Classify Wheel Classifier of Diclofenac

Most of the product production and processing in the current stage uses FL / ITC Single Classify Wheel Classifier Of Diclofenac to make products for products, which is one of the very common ways of processing, with the continuous improvement of scientific productivity, The technique of grading equipment is also imminent. The performance and internal configuration of the grading equipment of the airflow must also keep the trend of the era to continue the upgrade of the product.

High-speed jet enters the crushing chamber, collides with particles, and many times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, At the power of the rotational speed of FL / ITC Single Classify Wheel Classifier Of DiClofenac, the thickness of the material is separated from the separation, the fine particle size of the graded wheel into the cyclone separator and dust removal, and the pulverization region of the crude particles continues to be pulverized. The classifier produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the grading requirements of the material. The grading machine has a greater amount of processing, energy saving, simple operation, and low maintenance costs.

Let's take a look at how to extend FL / ITC Single Classify Wheel Classifier Of Diclofenac: 1, strictly follow the operating procedures; 2. If you are damaged parts, you should pay attention to time check, timely replacement. 3. The device body has no rotating components, not affected by the lifetime of the bearing. However, due to the difference in powder hardness, the degree of wear is different, especially the wear of the hierarchy knife tip, our body part uses special material production, the use of the knife tip is at least more than one year, the knife tip is wear more than 1 cm or more It will affect the grading accuracy, in order to avoid affecting product quality, it is recommended to contact us to replace the knife tip; 4. It is recommended to use the long filter device to improve equipment stability, and ensure grading accurate.