FL/ITC Single Classify Wheel Classifier with kaolin

Environmentally friendly FL / ITC Single Classify Wheel Classifier With Kaolin has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the mechanical processing and manufacturing industry in the stage has gradually replaced traditional roughing machinery production. The production of environmentally friendly machinery has become a new dominant leading to the implementation of technological innovation and upgrading in the machine industry.

How to continuity FL / ITC Single Classify Wheel Classifier WITH KAOLIN Life? Here are the following aspects: 1. In the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault. 2. When the new machine is running, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt. 3. Regularly check the lifting parts, promptly guarantee the quality of production and production. 4, blade and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick. 5, the host and gradient flow bearing oil grease lubrication, the use of special grease, and the degree of 265-295.6, and the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high. 7, the spiral feeder is 4,000 hours, plus ordinary calcium based grease.