FL/ITC Single Classify Wheel Classifier with Silicon nitride

With the rapid growth of China's economy, high-energy mining machinery industry, especially FL / ITC Single Classify Wheel Classifier With Silicon Nitride will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development, green, environmentally friendly, healthy bed jet rubbing equipment and products more extensive in the entire mineral powder industry. When applied to people's lives, it is necessary to optimize the use of equipment technology.

FL / ITC Single Classify Wheel Classifier With Silicon Nitride work principle airflow pulverizer, dust collector and air machine formation into a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed sluice nozzle. At the intersection of multiple high pressure airflow, the material repeatedly collides, friction, shear and crushing. Under strength, the thickness, fine product is separated, and the fine particles that meet the particle size requirements are collected by the cyclone and the dust collector by the grading wheel, and the crude particles reduce the crushing area to continue to break.

Let's introduce you to the operation method of FL / ITC Single Classify Wheel Classifier With Silicon Nitride. 1. Before using a pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened. 2. The spindle direction must be consistent with the direction of the arrow on the shroud, otherwise it may damage the machine and cause personal injury. 3. Check if the crusher is complete. 4. Check if the airflow pulverizer has a hard object such as a metal in a crushing room, otherwise it will damage the tool and affect the machine. 5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion. 6. The oil cup on the machine should always note full lubricant to ensure that the machine is operating normally. 7. The feeding should be stopped before stopping. If you do not continue to use, remove the residers from the machine. 8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately. 9. There is a slight vibration when using the fuselage. Be sure to tighten the cover to connect the handle to avoid accidents.