FL/ITC Single Classify Wheel Classifier with Battery material

Because Fl / ITC Single Classify Wheel Classifier With Battery Material, the research and development of classified machines at home and abroad attaches great importance to the research and development of classified machines at home and abroad. In the current market, there is a great development space.

FL / ITC Single Classify Wheel Classifier With Battery Material Working Principle: Passive fine powder is delivered to the hierarchy of the upper portion of the comminution device through the rising gas stream. The classifier classifies the qualified material and enters the cyclone collector (if a product having several particle size is required, add a plurality of vertical turbine grace machines). Fine tails are delivered to the bag dust collector via airflow. After filtration, the tail enters the exit of the lower part of the filter and empty the air. Main components of this unit: classifying machine, grinding, grading, synchronous completion, adjusting the speed of the classifier by frequency conversion speed, can adjust the product fineness. For example, if a machining process requires a number of granular sections of the product, then two to four can be increased on the basis of a standard classifier, so that the machine becomes a "two five" machines.

Let's take a look at the FL / ITC Single Classify Wheel Classifier With Battery Material Wheel Classifier With Battery Material Wheel Classifier With Battery Material. Fl / ITC Single Classify Wheel Classifier With Battery Material is an ultra-smash device that uses air separation, heavy polishing, shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber by the feed opening, and is crushed by the polishing wheel that is circumferential movement along the grinding rail, and dissensibly. The pulverized material brings out the pulverizer through the negative pressure air flow caused by the fan, into the material collection system, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed. The disc airflow pulverizer will first take a closer check in the transportation in the transportation, and then the high machine and the auxiliary electric control device are in place.Rehabilitate the pipeline of the primary aircraft, each pipe opening is equipped with a seal to coat the "iron anchor 609" liquid sealant to ensure the sealing of the pipe, and each single machine and pipe are connected to the ground wire, and Ground to avoid dust explosions caused by electrostatic sparks. Before each stand-alone trial operation, check whether there is a metal item in the machine, if there is an exclusion. Whether the bolt is firm, the tightness of the belt, the reliability of the shield, and the like. After five minutes of empty car, the operator should carefully observe the various instruments on the control cabinet, and they can be pushed after the electric carrier current is stable. After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subjected to the amount to ensure that normal operation of the discharge is fixed. The stepless speed handle of the classifier can change the speed of the hierarchy wheel while achieving the excellent adjustment of the product. If the particle size of the article is required, the speed can be improved, and the rotational speed is reduced, and large particle size particles can be reduced. The above is the normal acceptance operation process after receiving the FL / ITC Single Classify Wheel Classifier With Battery Material, you can try to identify the use.

More content, please pay attention to Shandong Alpa Powder Technology Co., Ltd., this The company mainly has airflow pulverizer, airflow mill, pharmaceutical gas flow crusher, disc air pulverizer, eddy current pulverizer.