FL/ITC Single Classify Wheel Classifier for pesticides

FL / ITC Single Classify Wheel Classifier for Pesticides is different from other crushers, which are collisions between particles, airflow impact and shear, high-speed airflow impact, friction A pulverized pulverizer for a shear and other components. It has the following main features: 1. The grinding temperature is low, can pulverize the thermal, low melting material. According to the high-speed jet Joule effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction. 2, short production cycle, high release rate. Due to high-speed collisions and closed crushing, the probability of collision between materials is very large, and dust does not leak. 3. Products having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained. 4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder. 5. A variety of joint operations can be achieved, and drying operations can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a raised role in the pharmaceutical industry.

The main performance characteristics of the airflow pulverizer: 1, it includes vertical grading equipment, product size D97: 8 150 microns adjustable, good particle shape, narrow particle size distribution. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time. 2, the device is disassemble and cleaning, the inner wall is smooth, no dead angle. The entire system is closed, less dust, low noise, clean and hygienic production process. 3. The control system uses program control and easy to operate.

How to continuity FL / ITC Single Classify Wheel Classifier for Pesticides? Here are the following aspects: 1. In the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault. 2. When the new machine is running, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt. 3. Regularly check the lifting parts, promptly guarantee the quality of production and production. 4, blade and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick. 5, host and gradient flow bearing oil grease lubrication, specialThe use of grease, and the degree of 265-295.6, the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high. 7, the spiral feeder is 4,000 hours, plus ordinary calcium based grease.