FL/ITC Single Classify Wheel Classifier for Modified starch

In this economical flourishing area, there are many people who know the air current pulverizer, FL / ITC Single Classify Wheel Classifier for Modified Starch technology is in a leading position in the same industry.

FL / ITC Single Classify Wheel Classifier FOR MODIFIED STARCH adopts high intelligent control system, easy to operate, easy to adjust, long service life, the main lesible components affecting system equipment life is a grading knife, if wear is serious If there is no timely replacement, it will affect the device grading accuracy.

Let's take a look at the maintenance tips for eddy current pulverizer transmission chains! Crusher Transmission Chain Protective Hoods should be intact, preventing personal injury accidents in the work in the work. Motor base fastening bolts To regularly check, the foundation must have sufficient steel, preventing the chain from joking or falling down due to the basis, causing drive failure. Check, repair, and maintenance of the machine, the power supply must be cut off and the sign is cut. It is strictly forbidden to extend the hand or other tools into the machine during the machine operation. Only after the machine is completely stopped, it can clean and check the machine. The cable in the pulverizer should have a protective casing. During the operation, at least the compressed air line is leaking, and the water water separation is discharged once in the three joints. Check if the unloading door is leaking weekly, whether the sealing strip is damaged, whether the unloading link mechanism is in a dead position. Clean the residual material attached to the inner wall of the bucket once a week. Wash the chain, sprocket, and refresh the chain sprocket with diesel brushing each month. Clean the injector of the inner wall of the mixer and the residual attachment material on the inner wall of the mixer and the cover. Monthly measurement of the variation coefficient of the exit and the finished package port of the finished mixer, the determination of the variation coefficient should select the shortest mixed product. In addition, users also need to check whether the wire connection in the motor junction box is loose. Clean the residual materials attached to the inner wall of the mixer and buffer. Clean up the oil and water separation of three linkages to ensure smooth air paths.

FL / ITC Single Classify Wheel Classifier for Modified Star Produced by Our companyh not only from the ordinary powder from 20-2 μm to fine fine powder, but also directly with mechanical pulverization equipment, forming a closed circuit, improving the pulverization efficiency, and avoiding the production of high temperatures in the cavity to cause adhesion of the thermal material. Glue, leading to operations, and at the same time, the classifier has also received a well-praised by the majority of users, and friends who need it are in contact with us!