FL/ITC Vertical Air Classifiertalc

FL / ITC Vertical Air Classifiertalc is an industrial equipment, with the development of society and people's lives needs, the industry is growing demand for a variety of fine flour, requiring fineness, purity and pass rate higher and higher, the application grader has become increasingly widespread.

In the conventional dispersion pulverization process, it is difficult to overcome the phenomenon of heating, viscology. The machine uses a swirling high-speed rotational movement to produce a strong gas stream within the mill. The material enters the crushing room under the negative pressure of the feed port. The vortex vibration generated by the strong gas flow between the blade and the module is generated by impact, shearing and grinding. The heat of the pulverizer is taken away by the airflow, and the heat generated during the crushing process will not accumulate. The finished powder from the screen stream, improves the milling fineness, can be adjusted by the screen production efficiency, uniform fineness.

any kind of mechanical device before use has certain precautions, be sure to check the precautions for operation, the failure rate to a minimum, so the FL / ITC Vertical Air Classifiertalc taken before use What precautions? 1. Check whether the firmware is tightened before use, whether the spindle direction is correct, so as not to damage the machine. 2, lubrication should be carried out as required to make the machine to operate normally. 3, the material cannot be mixed before the grinder is added to avoid damaging the pulverizer. 4. Do not treat foreign matter in time to avoid damage to the tool. 5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss. 6. If damage should be replaced immediately, certain components should be checked regularly.

Through the above study, it is not to maintain FL / ITC Vertical Air Classifiertalc even more understanding. For more information, please continue to pay attention to our website.