FL/ITC Single Classify Wheel Classifier for Battery material

Publish: 2021-09-07 14:00:13

Views:

FL / ITC Single Classify Wheel Classifier for Battery Material is different from other crushers, which are collisions between particles, airflow impact and shear, high-speed airflow impact, Friction and shear and other components for pulverized pulverizer. It has the following main features: 1. The grinding temperature is low, can pulverize the thermal, low melting material. According to the high-speed jet Joule effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction. 2, short production cycle, high release rate. Due to high-speed collisions and closed crushing, the probability of collision between materials is very large, and dust does not leak. 3. Products having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained. 4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder. 5. A variety of joint operations can be achieved, and drying operations can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a raised role in the pharmaceutical industry.

If you want to make a big performance during work, then maintenance is not less work, what is the maintenance classifier? 1. When cleaning the classifier It is necessary to pay attention to the motor not to be stained, and the shaft is also the same. 2. If you want to change the precision classifier, or if you want to repair, you must be in the case of power failure. 3, usually pay attention to lubrication and maintenance of the bearing of the classifier. 4. If the precision classifier works for 1,500 hours, remember to add lubricant.

Previous: FL/ITC Vertical Air ClassifierModified starch

Next: FL/ITC Vertical Air Classifierprecipitated silica