FL/ITC Vertical Air Classifier of Carboxymethyl cellulose

Publish: 2021-09-06 08:14:02

Views:

Currently, FL / ITC Vertical Air Classifier of Carboxymethyl Cellulose has gradually entered people's lives, more and more plants, and companies are using the equipment.

High-speed jet enters the crushing chamber, collides with particles, and many times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, In the power of the rotational speed of FL / ITC Vertical Air Classifier OF Carboxymethyl Cellulose, the thickness of the material is separated from the separation, the fine particle size of the grading wheel into the cyclone separator and dust removal, continues to be pulverized. The classifier produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the grading requirements of the material. The grading machine has a greater amount of processing, energy saving, simple operation, and low maintenance costs.

Fl / ITC Vertical Air CLASSIFIER OF Carboxymethyl Cellulose Operation Performance: Auxiliary operation performance: Auxiliary, the host is set in the centrifugal grading device, which can be fine grind, and a classification function, the wind is cut Sliced, no sifter or mesh, powder particles can be adjusted arbitrarily, after crushing materials, negative pressure delivery to the exhaust valve port, reaching the product requirements, super fine classifier is widely used in chemical, dyes, coatings, pharmaceuticals, food, etc. Different industries.

If you want to make a big performance during the work, the maintenance is not less work. What should be maintained? 1. When cleaning the classifier, you need to pay attention to the motor not to touch Take water, and the shaft is also the same. 2. If you want to change the precision classifier, or if you want to repair, you must be in the case of power failure. 3, usually pay attention to lubrication and maintenance of the bearing of the classifier. 4. If the precision classifier works for 1,500 hours, remember to add lubricant.

Previous: FL/ITC Vertical Air Classifier of carbon black

Next: FL/ITC Vertical Air Classifier of White corundum