FL/ITC Vertical Air Classifier of talc

 

FL / ITC Vertical Air Classifier Of Talc can effectively reduce costs and reduce costs, so applicable to low value of coarse powder. And the structure is simple, the maintenance is convenient, because the lifescas are less, the noise is small, and the energy consumption is low. And this classifier does not use the powder box grading wheel structure, more simple operation, more convenient maintenance. So it is capable of improving production capacity. At the same time, its inner wall is also smooth and wear, so it is also more conducive to the grading of materials. In addition, the grading machine is a negative pressure operation, which can make it dry and dust-free to achieve environmental requirements. It is operated stable, good reliability, and the classified product can also be uniform, consistent.

 

For FL / ITC Vertical Air Classifier Of Talc blocking troubleshooting, small clamps talk about their opinions, I hope to have some reference roles. Crushes blockage is the most common fault of machinery. It may be one of the most common failures in mechanical design, but because improper operation can cause many faults.
(1) The feeding speed is too fast, the load is increased, causing clogging. In the aquaculture process, pay attention to the deflection angle of the current table pointer at any time. If the rated current is exceeded, the motor overload and long-term overload will burn the motor. This situation should be reduced or closed immediately, but it can also be changed by increasing the feed speed to control the feed speed. Because the energy rolling mill is fast, the load is large, and the load fluctuates. Therefore, the current of the rolling mill is generally controlled around 85% of the rated current.
(2) The incisor of the discharge tube is different or the interference is too fast, and the universal crusher is blocked, and the conveying equipment does not match, resulting in weakening or calm of the drainage pipe. In order to find a fault, we must first clarify the export transport equipment, not change, adjust the amount of feed, and the normal operation of the equipment.
(3) The water content, aging, screening, crushing and sealing material of the hammer hammer are too high, and the general grinding will be blocked.
There is a need to regularly update the working state of the hammer aging and the serious aging, and check the screen regularly. Improve the production efficiency of universal grinding machines, improve the reliability of non-clogging and grinding.

 

ALPA Technology Co., Ltd. developed super fine classification machine, precision classifier, etc., can effectively protect the purity and accuracy of grading products, if you need to purchase related equipment, please feel free to contact us. .