FW/HTS Single Classifying Wheel ClassifierCarboxymethyl cellulose

With the development of society, the application of FW / HTS Single Classify Wheel ClassifierCarboxymethyl Cellulose has become more large.

When FW / HTS Single Classifying Wheel CLASSIFIERCARBOXYMETHYL Cellulose screen material, the screen has good common performance under the air pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the classifier without the need for rotating components. Through the precise control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors. The material is driven by the blower of the airflow pulverizer. The lowermost inlet of the classifier is moved upward to the hierarchical area, the strobe, the strongest centrifugal force generated by the high-speed rotation grade turbine. The fine particles that satisfy the particle size are entered into the cyclone separator or dust collector by the gap of the grading wheel blades. After collecting, some fine particles of the crude particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.

FW / HTS Single Classifying Wheel ClassifierCarboxymethyl Cellulose's daily maintenance is a very important part, hereby introducing FW / HTS Single Classify Wheel ClassifierCarboxymethyl Cellulose maintenance method. 1. When the machine is started or started, the appropriate amount of grease should be applied to ensure its life. 2. Check if the screws and nuts of each component are fastened. Check if the belt is stuck, whether it is tight. 3, regularly check the reliability of the equipment, prevent accidents or accidents. 4. The direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine. 5, equipment maintenance should be carried out by professional and technical personnel, other people must not be carried out to avoid damage to the equipment. 6, electrical components and lines should be checked regularly, whether it is intact, whether the ground is reliable. 7. The equipment should be cleaned in time to prevent the next use to avoid contamination materials.

Users who want to view crusher related information can also log in to our website!