Horizontal Single Classifying Wheel Air Classifierslag

What is the grading principle and process of Horizontal Single Classify Wheel Air Classifierslag? Below, you will share with you. 1. Open the switch in the control cabinet, start the power supply, the device operation; Physical role such as airflow and gravity is graded in three parts; 5, the airflow of three flow paths has a control valve group adjustment to maintain their respective balance; 6, the grading thick Chinese products are recovered separately; 7, clean air There is a blower to discharge into the atmosphere.

HORIZONTAL SINGLE CLASSIFYING W Heel Air Classifierslag generates certain noise in production, the main reason for generating noise is: (1) When the coal mill is running, the operating component drives air to generate a "whistle" call: (2) The equipment is running. The sound of vibration is generated; (3), the rubbing between the turntable or the hammer and the drug; the rotating part itself is friction. For noise generated, the main solution is as follows: (1) add lubricating oil to each rotating member, if the bearing and the axis are misalign, adjust the bearing wear, replace the bearing; (2) The heat generated during the crushing process also produces noise Cooling through the crushing chamber water cooled cooling, the muffler is mounted in the air intake port of the pulverization chamber; (3) damping the damping pad and other devices.