Horizontal Single Classifying Wheel Air Classifierpesticides

With the continuous development of pulverizer technology, Horizontal Single Classify Wheel Air ClassifierPesticides has gradually penetrated into people's daily lives.

Horizontal Single Classifying Wheel Air ClassifierPesticides can be used in series with multi-stage classifiers and produced with multiple particle sizes. The device is easy to disassemble, the inner wall is smooth, and there is no dead angle. The whole system is sealed, less dust, low noise, and production process clean and environmentally friendly. The control system uses program control and easy to operate.

How to continuity Horizontal Single Classifying Wheel Air ClassifierPesticides life? Here are the following aspects: 1. In the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault. 2. When the new machine is running, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt. 3. Regularly check the lifting parts, promptly guarantee the quality of production and production. 4, blade and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick. 5, the host and gradient flow bearing oil grease lubrication, the use of special grease, and the degree of 265-295.6, and the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high. 7, the spiral feeder is 4,000 hours, plus ordinary calcium based grease.

The above is the use of Horizontal Single Classify Wheel Air ClassifierPesticIDes, you want to know more about other crusher knowledge, you can pay more attention to us!