FW/HTS Multiple Classifying Wheel Classifier with Battery material

In the rapid development of rapid, there are many people have a certain understanding of FW / HTS Multiple Classify Wheel Classifier With Battery Material, crusher technology is in an absolute leader in the industry.

FW / HTS Multiple Classifying Wheel Classifier WITH BATTERY MATERIAL has the following advantages: The ultrafine classifier is achieved by a pneumatic conveyor, a high-speed collision to achieve a purpose. With wind energy, it will be powdered once, and the traditional screening procedure is canceled. Each independent operation, complete function, compact structure, stable technology, high noise, high efficiency, beautiful appearance, flexible use, wide adaptation, non-powder, adjustable powder, easy to repair, smash And dry non-fibrous materials and minerals have the ideal effect.

Let's talk about how to use FW / HTS Multiple Classify Wheel Classifier With Battery Material. First, prepare before booting the host, attachment machine, pipeline, and valve, whether it is intact, whether it works fine. Second, open 1. On the compressor power supply, the pressure valve and the main air valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power. 2. The zero start classification wheel is gradually adjusted to the specified speed. 3. Turn on the fan, the cyclone separator discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break. 4. Finding wheelThe particle size can be adjusted by grading wheel frequencies and charging. Third, the sequence of shutdown is: inverter - feeder - Main valve - Compressor - Steady wheel motor - Cyclone discharge, dust removal switch - Fan - Total Power - Air Compressor. Fourth, repair 1. The motor should be lubricated regularly, but the grease should not be too large, the bearing temperature is too high. 2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable. 3. After a crushing material, after a certain period of time, it is necessary to remove the inner sticky of the chalk, so as to avoid blocking, thereby affecting the crushing effect. 4. After the filter bag is a period of time, it should be cleaned or replaced. 5. Precautions 1. When the discharge device is running, the unloading port cannot be extended to avoid accidents. 2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller and electricity will be damaged. 3. Regularly check the safety valve to ensure safety.