Horizontal Single Classifying Wheel Air Classifier for salt

Most of the product production and processing in the current stage uses Horizontal Single Classifying Wheel Air Classifier for Salt to make products for products, which is one of the most common ways of processing, and the continuous improvement of scientific productivity, grading The technical replacement of the equipment is also imminent. The performance and internal configuration of the grading equipment of the airflow must also keep the trend of the era to continue the upgrade of the product.

Horizontal Single Classifying Wheel Air Classifier for Salt uses material to achieve huge kinetic energy under high-speed airflow, causing severe friction between high-speed collisions and particles in the pulverizing chamber, while high-speed airflow The shear effect is generated to achieve the purpose of pulverization.

Do you know how to use Horizontal Single Classifying Wheel Air Classifier for Salt correctly using HORZONTAL SINGLE CLASSIFYING WHEEL AIR I hope the content below can help you. 1. Preparation before the comminution is started to check whether the host, joint, pipeline, and the valve are normal, working properly. 2, open the pulverizer (1) Open the compressor power supply, dustpress pressure valve and the main valve, open the power switch of the pulverizer, turn on the power switch. (2) From zero, gradually adjust to the specified speed. (3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging. (4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel. 3, pulverizer shutdown is: inverter - feeder - main valve compressor - compressive type impeller motor - cyclone material, dust removal switch - fan - universal power supply air compressor. 4, eddy current pulverizer maintenance (1) Regularly lubricate eddy current crushing machine, but the lubricant should not be too large to prevent the bearing temperature too high. (2) Check the wear of the impeller, screw conveyor and the crushing nozzle. (3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect. (4) After a filter bag, the vortex pulverizer is filtered, and it should be cleaned or replaced. 5, vortex grinder Notes (1) unloading equipment is running, noThe method arrives at the unloading port to avoid accidents. (2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged. (3) Regularly check the safety valve to ensure safety.

The company has consistently follows the management of the standard, puts the quality of the first production and service policy, providing customers who are safe with confidently airflow crusher products and services.