FW/HTS Multiple Classifying Wheel Classifier with rice

Everyone knows that choosing a product or service, to learn from all aspects of the milling machine processing, service, quality, etc.

FW / HTS Multiple Classifying Wheel Classifier WITH RICE can effectively reduce costs, reduce costs, so applicable to low value of coarse powder. And the structure is simple, the maintenance is convenient, because the lifescas are less, the noise is small, and the energy consumption is low. And this classifier does not use the powder box grading wheel structure, more simple operation, more convenient maintenance. So it is capable of improving production capacity. At the same time, its inner wall is also smooth and wear, so it is also more conducive to the grading of materials. In addition, the grading machine is a negative pressure operation, which can make it dry and dust-free to achieve environmental requirements. It is operated stable, good reliability, and the classified product can also be uniform, consistent.

Let's take a look at the feature of FW / HTS Multiple Classify Wheel Classifier with Rice. 1, can effectively reduce costs, reduce costs, suitable for low value of coarse powder. 2, simple structure, convenient maintenance, less easy to lose weight, low operating noise, low energy consumption. 3, the classifier uses large diameter single-stage classification wheels to improve production capacity. 4, the inner wall smooth and wear, more conducive to the classification of materials. 5. Use a negative pressure operation to make it no dust to achieve environmental requirements. 6, running stable and reliable, its product can be uniform.

In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault. When the new machine is running, the transmission belt is easy to elongate, pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt. If you want to check, you should replace production quality and production in time. Blades, the lining should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is replaced after the particle size is replaced. The host and the grading flow bearing are lipids, and the 2nd special lipid is used. The replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the outer space space in the bearing cavity. Do not fill the grease. Otherwise It will cause too high of the bearing temperature. The spiral feeder has changed the lime than half a year, and the calcium-based grease is added. In the output shaft E, ie the pulley E, avoiding heavy hammer, damage the part. It is strictly forbidden to turn the handle on the stop. This regulatorWith lubricating oil, N32 alkaline high-z7-high-grade anti-motor pressure oil is used, and the deceleration machine uses 401 general lubricants, and it is not necessary to use other machines. After four or five months, new oil should be replaced.

ALPA powder is dedicated to the development, production and sales of ultrafine powder and grading equipment, support according to demand, the equipment model is complete, the quality is reliable, the efficiency is high, the low energy consumption, easy operation, the price is reasonable, 24 Hours can consult!