FW/HTS Multiple Classifying Wheel Classifier for slag

With the development of society and life, the demand for FW / HTS Multiple Classifying Wheel Classifier for SLAG is getting bigger and higher in the demand for FW / HTS Multiple Classifying Wheel Classifier For SLAG, and the requirements for fineness, purity, and pass rate are increasing. In the current market, there is a great development space.

FW / HTS MULTIPLE CLASSIFYING WHEEL Classifier for SLAG is a high-speed airflow to form a high-speed airflow using multiple relative-arranged nozzles to achieve ultrafine pulverization. The crushed material enters the grading chamber with the rising airflow. Since the grading rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the hierarchical rotor, and the center of heart is generated by the viscous effect of the airflow. When the centrifugal force of the particles is greater than the heart force, that is, the fractional particle diameter The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air. Low temperature without medium smashing, ensuring high purity and physical properties of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet is more than 30% of the conventional gas flow milling machine, and the grading accuracy is higher. ALPA equipment is small, and the structure of the pulverizer can be highly machined ultrafine powder, avoiding the wear of the horizontal grading machine grading part, and the service life of the equipment and easy-to-load load under the same material is multiple products. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74um.

FW / HTS MULTIPLE CLASSIFYING WHEEL CLASSIFIER for SLAG Applications 1. High Hardness Materials: silicon carbide, corundum, carbide, alumina, zirconia, garnet, zircon sand, diamond, etc. 2. Non-metallic minerals: quartz, graphite, kaolin, calcium carbonate, mica, heavy crystal stone, mullite, wheat stone, silica bites, talc, leaf wax stone, etc. 3. Chemical industry: aluminum hydroxide, silica gel, various dyes, epoxy resins, various auxiliaries, etc. 4. Food medicine: pollen, hawthorn, pearl powder, Ganoderma lucidum, various vegetable flour, various Chinese herbal medicines, various health products, cosmetics, antibiotics, etc. 5. Metal materials: aluminum powder, magnesium powder, zinc powder, tin powder, copper powder, etc. 6. Other materials; ceramics, refractory materials, electronic materials, magnetic materials, thinSoil material, phosphor powder, photocopying materials and other materials.

FW / HTS MULTIPLE CLASSIFYING WHEEL CLASSIFIER for SLAG produces certain noise during production, the main reason for generating noise is: (1) When the coal mill is running, the operating member drives air to generate "whistle" "Call: (2) The device is running. The sound of vibration is generated; (3), the rubbing between the turntable or the hammer and the drug; the rotating part itself is friction. For noise generated, the main solution is as follows: (1) add lubricating oil to each rotating member, if the bearing and the axis are misalign, adjust the bearing wear, replace the bearing; (2) The heat generated during the crushing process also produces noise Cooling through the crushing chamber water cooled cooling, the muffler is mounted in the air intake port of the pulverization chamber; (3) damping the damping pad and other devices.

ALPA Technology recommends that you must pay attention to periodically checking the performance of the equipment during use using ultrafine airflow classifiers, jet grading machines, powder classifiers, must pay attention to regular inspection equipment performance and prevent malfunctions during use.